Quiet. Digital. Quick.
Quiet. Digital. Quick.
Vantage Galan 3T
Patient Ease Results in Optimized Image Quality
Get streamlined workflow, high-quality images and maximum patient comfort in Canon Medical Systems' Vantage Galan™ 3T MR system. The system was designed to meet the needs of you and your patients, giving you the tools you need to provide better patient care without compromising the patient experience.
Advanced intelligent Clear-IQ Engine (AiCE)
Intelligent
AiCE intelligently removes noise from images which results in higher SNR and enables increased resolution. Achieve sharp, clear and distinct images utilizing the power of Deep Learning, allowing you to see through the noise.
Compressed SPEEDER
Compressed SPEEDER is a new imaging technique that can accelerate scan times utilizing compressed sensing technology. This unique imaging approach enables high-speed imaging and reduced scan acquisition times.
Brain Example
0.4 x 0.4 mm resolution, 2.5 mm slice
CS x2 Scan Time 3:05
Compressed SPEEDER
Knee
Compressed SPEEDER can decrease scan times
No Acceleration
CS 2.0
Scan time 2:50
Scan time 1:26
SP2
CS2
- Grade 3 chondral fissuring
- Delamination of the medial patellar facet is clearly demarcated
- Using Compressed SPEEDER factor of 2.4
Vantage Galan™ 3T / XGO Edition*
With the new high performance Saturn X Gradient.
Specifications/Features:
- 45 mT/m Amplitude
- 200 T/m/s Slew Rate
- Advanced gradient design
- High-Pressure Gradient Molding
- Gradient Triple-Cooling
*Optional
Vantage Galan 3T / XGO Edition*
PUREGradient
Digital Gradient Waveform Control for gradient performance optimization.
- Up to 30% increase in SNR for Brain DWI
- Up to 110% increase in b-value at a fixed TE in DWI
*Optional
Increased SNR without increasing b-value
Standard Acquisition
Higher diffusion weighting without increasing TE
Vantage Galan 3T / XGO Edition
Multiband SPEEDER for Diffusion Weighted Imaging*
Acceleration for Advanced Diffusion Weighted Imaging.
- Multiband SPEEDER technology enables the excitation and acquisition of two different slices simultaneously
- Specifically designed to accelerate advanced diffusion scans such as DTT and IVIM
*Multiband SPEEDER is optional and exclusive to the Galan 3T / XGO Edition
With Multiband SPEEDER vs. Without Multiband SPEEDER 
48-Direction Diffusion Tensor Imaging PURERF Tx Technology
Optimized RF design improves SNR.
PURERF Tx RF shielding technology maximizes the RF transmission efficiency for optimal image quality.
- Up to +20% SNR with PURERF
PURERF Rx Technology
Electronic noise reduction receive technology improves SNR.
Unique acoustic noise reduction suites.
Pianissimo Zen¹
- Pianissimo Technology
- Pianissimo Zen Sequences
- mUTE
- mUTE 4D-MRA
- FASE-DWI
- Pianissimo + mUTE sequences
- Less than 2dB acoustic noise increase over the ambient noise (Absolute Value: Less than 63dB*)
*99% reduction by unit of Loudness level "dB" and 97% reduction by unit of perceived loudness "Sone"
¹ Optional
mUTE
mUTE-MRA
FASE-DWIComfortable for large patients.
Wide 71cm Bore
Wide shoulders and large midsections can still fit comfortably in the expansive bore of the Galan 3T.
MR Theater*
In-bore visuals enhance patient comfort, thereby helping to put your patients at ease.
Patients undergoing MR exams will find a relaxing environment with Canon Medical Systems' new MR Theater. Creating an immersive virtual experience for patients, the new MR Theater gives patients a visual focal point to distract them from the exam, encouraging them to relax and stay still, enabling clinicians to produce efficient, high-quality imaging.
*Optional
Clinical Applications
Quick neuro exams.
SUREBrain
The Galan 3T with PURERF and Saturn technologies is designed to increase signal-to-noise ratio (SNR) by up to 20%, allowing for, faster sampling and higher resolution images; combined with the ability to automatically stack protocol sequences with NeuroLine+ results in quick neuro exams.
Time Resolved Non Contrast MRA.
mASTAR
Multiple scans with different TIs can now be combined into a shorter, single acquisition.
Quiet distortion-free diffusion.
FASE-DWI
- Less distortion on FASE DWI compared with the ones by SS-EPI
- Acoustic noise level is lower with FASE silent DWI than with EPI for DWI
*Kondo Hiroki, et al. (2016) Development of the Quiet Sequence Using Fast Advanced SE DWI. JSRT 72nd
Extend the range of imaging to tissues traditionally very difficult for MRI.
Ultrashort TE (UTE)*
Ultra short echo times allow for imaging of tissues with very short relaxation times.
*Optional
UTE in MSK (Ankle)
TE = 2ms
TE = 0.096ms
Subtraction
Optimized Sequences for coronary imaging using SPAIR fat suppression.
SPAIR + T2 Prep Pulse with RMC
Additional options for MRCA:
- SPAIR pulse (Fat Suppression)
- T2 Prep pulse (T2 contrast enhancement)
Left Main Branch of the Coronary Arteries
Right Coronary
Contrast in your images. Not in your patients.
Non-Contrast Imaging
An increasing awareness of the potential risks associated with gadolinium-based contrast agents has revealed the need for alternative, contrast-free MRA techniques. We provide clinicians four generations of unique, non-contrast MRA sequences that minimize risk to patients while producing exceptional images. These images are often better than those acquired with conventional contrast enhanced techniques.
Phase Sensitive Inversion Recovery (PSIR)*
PSIR in the heart provides improved contrast in late-enhanced imaging by using a more robust nulling of healthy myocardial signal without the need for an inversion time (TI) calibration scan. By eliminating the need for calibration, cardiac examinations can be completed with fewer breath holds and greater patient comfort.
The images of PSIR are from Heart Institute (Instituto do Coração), University of Sao Paulo Medical School, Brazil.
*Optional
Left : Delayed Enhancement, Right : PSIR
MOdified Look-Locker Inversion recovery (MOLLI)¹
Expand your cardiac toolset with T1 mapping, allowing you to acquire a much more quantitative characterization of myocardial tissue.² Canon Medical Systems' T1 mapping utilizes a MOLLI sequence, enabling the acquisition of a full T1 map within a single breath hold.
The images of MOLLI are from Heart Institute (Instituto do Coração), University of Sao Paulo Medical School, Brazil.
¹ Optional
² Post processed with Vitrea™/Medis
Post-processed by Vitrea/Medis
Post-processed by Vitrea/Medis
Oncology Radiation Therapy Planning
We understand it is critical to accurately target the tumor and spare healthy tissue when planning your oncology treatments.
We partnered with:
- LAP Laser¹ a global market leader in patient alignment in radiotherapy MR conditional laser systems
- CIVCO² Radiotherapy a designer of high quality, innovative radiotherapy products.
- Mirada³ Medical RTx application available through Vital provides for efficient pre-planning MR-CT fusion.
¹ Optional, designed and manufactured by Lap Laser Medical
² Optional, designed and manufactured by CIVCO
³ Optional, designed and manufactured by Mirada Medical
Oncology Radiation Therapy Planning
Universal Couchtop™ Overlay*
MR oncology radiation therapy with precise and reproducible patient positioning.
Take your oncology radiation therapy planning to the next level with the MR Overlay from CIVCO. The MR Overlay, made of fiberglass with a foam core, features indexing at 7 cm increments to help you accurately transfer from your imaging to your treatment.
Optimize your planning capabilities with the three-pin Lok-Bar™, allowing MR compatible devices to be indexed to your MR Overlay helping to prevent unsafe devices from being used.
*Optional, designed and manufactured by CIVCO
Oncology Radiation Therapy Planning
Patient Alignment Laser¹
Complete your radiation therapy planning with the MR Laser from Lap Laser. This patient alignment laser system helps you achieve precise patient marking, accurate planning and exact positioning, allowing for successful treatment. Ensure identical patient alignment for both CT and MRI for easy and precise image fusion, utilizing Mirada XD3² Fusion, for your oncology radiation therapy planning.
¹ Optional, designed and manufactured by Lap Laser Medical.
² Optional, designed and manufactured by Mirada Medical
Oncology Radiation Therapy Planning
Oncology Fusion Software*
Mirada RTx.
Mirada's software tools for supporting radiation therapy treatment planning bring new levels of functionality, speed, and accuracy to the planning process.
- Multi-modal Deformable Image Registration
- Comprehensive QA tools enable assessment of Deformable Image Registration
- PET/CT and MR included in planning
- Single-click multi-atlas contouring
- Dose warping and summation
- Adaptive re-planning
*Optional, designed and manufactured by Mirada Medical
Designed to fit within a standard 1.5T room.
Compact Footprint
- Scan Room: 18.56 m²
- Computer Room: 6.28 m²
- Operator Room: 2.08 m²
- Total Space: 27 m² *
*The 5 Gauss line is not confined within the Scan Room. Controlled access area should be taken into account by the facility when preparing for installation. The above specifications may not meet the local requirements such as for access as is required by the Americans with Disabilities Act in the United States. Please consult with your architectural and/or electric consultant for coding requirements. Some power equipment may be required to be placed in a dedicated electrical room.
Low power consumption.
Eco-friendly
The Galan 3T automatically enters Low-Power mode the moment the patient table is lowered. It quickly wakes up when the table is raised to scan the next patient.
- 9.25kW Standby power
- 70kVA Power capacity
Integrated Coil Workflow Technology
Integrated coils are uniquely designed for improved workflow and patient comfort.
Canon Medical Systems MR System's integrated coils* making it easy to handle multiple studies by allowing you to position the patient and utilize the coils you need in one easy step.
