Responding to ever increasing case loads and cost pressures on the healthcare system, we listened to MRI radiologists and technologists needs. The result is Vantage Fortian, which will get your MRI team moving by advancing productivity with reimagined workflow solutions that focus on saving time. Experience advanced MRI productivity that adapts to your facility. Now, let’s move!
Canon’s Advanced intelligent Clear-IQ Engine (AiCE) Deep Learning Reconstruction (DLR) removes inherent noise which helps you to alleviate the fundamental tradeoff between SNR, resolution and scan time.
AiCE allows high SNR1 orthopedic imaging with clinically relevant scan times.
View Scan ParametersSequence | FOV | Resolution | Scan Time | Other Parameters | Other Param |
---|---|---|---|---|---|
Sag T2* | 16 x 16 | 0.25 x 0.25 | 3:25 | AiCE | |
Sag T1 | 16 x 16 | 0.2 x 0.2 | 2:20 | AiCE | |
Sag STIR | 16 x 16 | 0.3 x 0.3 | 2:52 | AiCE | |
Ax T2 | 16 x 16 | 0.3 x 0.2 | 2:16 | AiCE | |
Ax T1 | 16 x 16 | 0.25 x 0.2 | 3:18 | AiCE | |
Cor STIR | 16 x 16 | 0.3 x 0.3 | 2:52 | AiCE |
*Actual Scan times may vary by case
1AiCE provides higher SNR compared to typical low-pass filters
Exsper compliments AiCE by reducing scan time allowing for enhanced resolution. AiCE intelligently removes noise resulting in increased SNR and enhanced anatomic detail.
Harnessing the enormous computational power of a Deep Convolutional Neural Network (DCNN), AiCE is trained to restore low SNR MR data to match the properties of higher SNR1 images in a clinically reasonable scan time with SPEEDER.
View Scan ParametersSequence | FOV | Resolution | Scan Time | Other Parameters | Other Param |
---|---|---|---|---|---|
AX PD FS FSE | 17 x 17 | 0.25 x 0.25 | 3:25 | 16 ch Flex SPEEDER M AiCE, EXSPER |
|
SAG T1 FSE | 16 x 16 | 0.3 x 0.2 | 2:16 | AiCE, EXSPER | |
COR PD FS FSE | 15 x 15 | 0.3 x 0.3 | 2:52 | AiCE, EXSPER | |
COR T1 FSE | 15 x 15 | 0.2 x 0.2 | 2:20 | AiCE, EXSPER |
*Actual Scan times may vary by case
1AiCE provides higher SNR compared to typical low-pass filters
Routine ankle exam was scanned in less than 9 minutes by using a combination of AiCE, to increase SNR1, and either Exsper or Compressed SPEEDER to reduce scan time. Canon's AiCE DLR removes inherent noise which helps you to alleviate the fundamental tradeoff between SNR, resolution and scan time, allowing for high quality imaging. 16 channel Flex SPEEDER coil used increase patient comfort.
View Scan ParametersSequence | FOV | Resolution | Scan Time | Other Parameters | Other Param |
---|---|---|---|---|---|
Ax PD FS FSE | 17 x 17 | 0.3 x 0.3 | 1:36 | 16 ch Flex SPEEDER L AiCE, Exsper |
|
Sag PD FS FSE | 15 x 19 | 0.2 x 0.2 | 2:18 | AiCE, Exsper | |
Cor PD FS FSE | 12 x 17 | 0.2 x 0.2 | 1:16 | AiCE, Exsper | |
Cor T1 FSE | 17 x 17 | 0.2 x 0.2 | 1:48 | AiCE, Compressed SPEEDER |
*Actual Scan times may vary by case
1AiCE provides higher SNR compared to typical low-pass filters
Subscribe to receive information on products.
© Canon Medical Systems, USA. All rights reserved.
Design and specifications subject to change without notice.